In System menu com 4 is found and seems to work correct. The firmware-uploader seems to work correct as well.
but wen I try start the joint calibrator, this happens :-(
what do I make wrong? what do I have to do?
Thanks - Stefan from Germany
top of page
Edited:Â Dec 28, 2023
Problems in calibrating Nybble
Problems in calibrating Nybble
11 comments
Like
11 Comments
bottom of page
this is what UI.exe tells me, but I don't understand, what to do, Can anyone please help me? I'm very sad, that it doesn't work!!!
ardSerial date: Oct 10, 2023
['3', '7', '9']
C:\Users\stefa\.config\Petoi already exists
C:\Users\stefa\.config\Petoi\defaultConfig.txt
2023-12-29 13:13:52,015 ardSerial - INFO - ['English', 'Nybble', '.\\release', '2.0', 'NyBoard_V1_2', 'Standard']
*** Available serial ports: ***
COM1
COM4
2023-12-29 13:13:52,050 ardSerial - INFO - Connected to serial port: COM4
---Exception---： could not open port '': FileNotFoundError(2, 'Das System kann den angegebenen Pfad nicht finden.', None, 3)
2023-12-29 13:13:52,051 ardSerial - INFO - Connected to serial port:
2023-12-29 13:13:52,051 ardSerial - INFO - Connected to serial port: COM1
2023-12-29 13:13:52,052 ardSerial - INFO - Connect to serial port list:
2023-12-29 13:13:52,052 ardSerial - INFO - COM4
2023-12-29 13:13:52,052 ardSerial - INFO -
2023-12-29 13:13:52,052 ardSerial - INFO - COM1
2023-12-29 13:13:52,053 ardSerial - INFO - close the serial port.
Exception in thread Thread-2:
Traceback (most recent call last):
File "ardSerial.py", line 319, in closeSerialBehavior
File "SerialCommunication.py", line 80, in Close_Engine
AttributeError: 'NoneType' object has no attribute 'is_open'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "threading.py", line 926, in bootstrapinner
File "threading.py", line 870, in run
File "ardSerial.py", line 321, in closeSerialBehavior
File "SerialCommunication.py", line 80, in Close_Engine
AttributeError: 'NoneType' object has no attribute 'is_open'
2023-12-29 13:13:52,056 ardSerial - INFO - close the serial port.
2023-12-29 13:13:52,165 ardSerial - INFO - The firmware file folder is .\release
2023-12-29 13:13:52,175 ardSerial - INFO - portStrList is ['COM4', '', 'COM1']
Hi, the software only automatically connects to a device with standard Petoi firmware installed. Have you upgraded the firmware using the Firmware Uploader? You also need to turn on the battery's power.