Forum
Robot Shop
More
the app doesnt respond if i click a button, and i have uploaded the firmware and opencat as well
even then the problem with tkinter persists
you finish the process in the serial monitor of Arduino IDE, please refer to:
If you still have problems, would you like to have a remote session so we may have a quick fix for the issue? please select a time slot from this calendar: https://calendly.com/petoi-tech-support/google_meeting
OK, I see you have booted the meeting, see you tommorrow.
the petoi app doesnt work at all
it also says parmeters sucessfully uploaded and freezes up
but i did
heres what happens when i try to reset the firmware with battery on
When you upload the firmware, no need power on by battery, please long press the button on battery 3 seconds to power off the robot, the yellow LED should light off.
BTW: please use the latest version(V1.1.7) of the Petoi Desktop App to upload the latest firmware.
The robot must be powered by a battery to rotate its joints, It's VITAL for controlling joint movement!
The yellow LED on the mainboard should light up, otherwise, plug in the battery and long-press its button for 3 seconds to power on the robot.
the petoi app doesnt work at all
it also says parmeters sucessfully uploaded and freezes up
but i did
heres what happens when i try to reset the firmware with battery on
BTW: please use the latest version(V1.1.7) of the Petoi Desktop App to upload the latest firmware.
The robot must be powered by a battery to rotate its joints, It's VITAL for controlling joint movement!
The yellow LED on the mainboard should light up, otherwise, plug in the battery and long-press its button for 3 seconds to power on the robot.