Wonderful little kitty this Nybble! I am trying to plug the servo wires into the Nyboard (V1 1) which is installed with the Petoi logo up, so the plugs go
under the board. I took the screws out to lift the board to make the connections but now can't put the board back down because there's just not a big enough opening. I am not attaching a Pi, but should I flip the board over so the plugs are more accessible from the top or cut the plywood to enlarge the opening, but weaken the structure? Also my servo wires are brown, red, yellow. Which way do they plug in?
You are totally brilliant! I think this is going to work…. Thanks!