Hello, I have been assembling bittle following the instructions and, after several tries, I ended up finding this issue when validating calibration:
When bittle is moving its limbs, his front-left limb won't behave like the rest.
I have tried different calibrations but I'm unable to fix it (so far), so I would like to ask if this problem is due to calibration or any other cause such as battery weight (I have tried sliding it too), any problem with servos , etc. to help me understand what is happening and why.
Thank you
It's not a big problem. The servo has a wider range (270 degrees) than regular servos (180 degrees at most). It will have variance at both ends. If you really want the servo to reach that end, you can take the servo off, rotate by one tooth then attach it.