Is there a way to get a 3d model for the cover or the dimensions of the existing one?
I will use my own bluetooth module for control bittle by joystick, but unfortunately the module (plus some further cables and modules) doesn't fit under the standard cover.
Before i scale the standard cover on my own, maybe someone has already printed a customized cover?
I just want to increase the height a little bit, so my added modules were protected, when bittle is falling or dropping.
At the moment i've created my own neck part and head, which is able to host a ESP32 camera module, which provide a wlan and a webserver for the video transmission.
@Poker Lucky Varsity Jacket I respect the effort you put into your blog and the way you write it. Please continue to share more posts like this.
I forgot to reply last time. You could create an extension wall that clips on the shoulder hooks and provides two new hooks on its top edges. Then you can still use the original cover. In that way, you also save a lot of printing material and time.
You may share your model on Thingiverse, and don't forget to add its link under this post.
Hello community, i've created a first draft of a higher cover for 3D printing and it fits. Additionally rescue movement is still working, too.
I will improve some points in future, for example:
- thinner walls, so the assemble/disassemble will working easier (currently you need 'long' fingernails, to deassemble it)
- optimize dimensions, so cover fits nearly perfectly
- close the little gap on front- and backside
But currently it fullfills the requirement of more space and protects the controller, when bittle is falling.
Unfortunately i can't upload the .stl-file.
Does anyone know, how i could upload the .stl-file here?