Hi,
I just finished IMU calibration, now is for the servo calibration. It is very annoying when the Nybble continuously beep like in the link below. Please help me to turn it off, I find no where talk about it.
https://drive.google.com/drive/folders/13E-0M5QjJM8XDlgiXIAkDDy2FVvfWpWs?usp=sharing
Thank you very much.
Tuan
Hi, the reparative melody is a warning that the battery power is not turned on. Please long-press the battery's button to turn on the power. The yellow LED on the board will light on and the melody will stop.
Turning on the battery is required to correctly calibrate the joints because the servos should be powered to rotate to the calibration angles. It's good that you observed the sound and asked.
The detailed instruction is at: https://docs.petoi.com/joint-calibration